Why is my laptop battery not charging when plugged in?

Without your laptop, what would your digital world look like? Plugging your laptop into a power supply will usually result in a chirpy sound or an LED light. This signals that everything is fine. If you find that your AC adapter doesn’t work, it could be a serious problem. It’s a headache to deal with a dead laptop battery.

It’s easy to assume that a dead laptop battery means a trip to the computer repair shop.  This guide will help you understand why your laptop battery isn’t charging and provide 6 tips for fixing it.

What caused my laptop’s battery to stop charging?

Computers are made up of hundreds of pieces that work together to function properly. If one part fails, you will likely be left wondering why. There are many factors that can cause your laptop’s battery to go flat. We have narrowed it down to three main culprits: software malfunction, power cord problems, and declining battery health.

Problems with power cords
Your cord can be bent in the earliest days by wrapping it in a bag or setting it down in unusual ways to fit a distant outlet.

To power your laptop, key components must work in concert. A lot of chargers for PCs come with a 2-in-1 AC adapter. One connects to the wall, and the other connects to your laptop.

Software failure
Windows 10 is one of the most self-sufficient operating system in history. It can diagnose internal problems and initiate updates that will keep your software up-to-date.  Your computer may reject AC adapter power if your driver is out of date

Battery health is declining
Laptop batteries are like any other piece technology.  A declining health status is one of the main reasons a laptop battery stops charging. An old laptop computer can’t hold a charge and so will a laptop battery not charging hp.

  • Lose charge quickly?
  • Do you need to charge the battery fully?
  • These are all signs that your battery may be aging. Are you unsure about your battery’s health and condition?
  • Download our step-by_ step guide to learn how to run a Windows 10 battery report.

How to fix a non-charging laptop?

You are now ready to tackle the problem yourself. These 8 tips could save you a trip to the repair store or a call to your computer manufacturer.

1. Verify that you are plugged in

It is impossible to charge a laptop if it is not connected to a power source. Make sure everything is plugged in properly. Take a look at every contact point from the outlet to AC adapter, and the adapter to your laptop port. You should have minimal space between the plugs.

Make sure to inspect the bottom of your laptop to ensure that the battery is securely seated in the frame.

It is important to verify that the problem is not the outlet. It is common for blown fuses to occur. After confirming that all contact points are intact, you will need to check the outlet or reset your surge protector.

2. Verify that you are using the correct port

It was the birth of the USB C port that has made it a key component of many of the most recent laptop computers. Two USB-C ports on a computer will likely have different functionality that you don’t know about. One USB-C port is for charging and the other for data transfer.

3. Take out the battery

These steps will be helpful if your laptop has a removable battery.

Step 1. Take out the battery by removing any bolts and screws.

Step 2. For 10-15 seconds, hold the power button down

Step 3. Connect the charger

Step 4. Turn on the computer

If your laptop turns on normally, it’s likely that your charger isn’t the problem. It is probably a bad battery. You can confirm this theory by reinstalling the battery and attempting to boot up again.

You may need to take your laptop to a specialist if it does not have an external battery.

4. Check your power cords for unusual bending or breaks

You can inspect your power cords by looking at the length to see if there are any unusual bends, breaks or warped flexing. This could indicate that you have suffered physical damage.

5. Update your drivers

Sometimes, all your computer needs to get back to normal is a quick re-up of driver updates. These steps will help you update the battery drivers on your Windows 10 laptop.

Step1. Right-click on the Start menu to open Quick Access menu. Select Device Management.

Step 2. Open the drop-down menu under Batteries and right-click Microsoft ACPI compliant Control Method Battery

Step 3. In the new selection window, click Update Driver

Windows will ask you “How would you like to search for drivers?” You’ll be able to choose to have Windows search for you automatically or manually search your computer for the right software. After updating, restart your computer and charge it again.

6. Check the health of your charging port

It should be easy to plug your AC adapter into your laptop’s power connector. Try cleaning your AC power port with a toothpick, or compressed air if your PC jack has become clogged with dirt and debris. Your problem could be more serious if your connector points become wobbly.

Read more Best laptop for bloggers


Back to top button